How To Install Blades On An Ice Auger

In this guide, you will learn how to supercede the auger in a GE ice maker. If yous are looking for steps to practice this, you are welcome.

How to Replace the Auger in a GE Ice Maker

To replace the auger in a GE ice maker, start past turning the ice maker over so that it lies face downward. Then, unmount the ii screws at the bottom part of information technology with a Philips screwdriver. These screws are responsible for securing the cover.

Side by side, turn it face upwards. Yous will run into another spiral at the middle elevation part. This holds the shield in place. Remove information technology.

When you remove the screw, gently push the shield out to costless it from the assembly.

Now, unmount the screw that holds the actuator rod in identify by the side. Next, using a flat head screwdriver, loosen the retaining tabs that hold the housing of the auger associates in place.

Remove the east-clip at the bottom of the assembly and take the washer out. After this, yous are gratis to lift the housing out of the way.

With an adjustable wrench, turn the retainer of the bearing clockwise to loosen it. Unthread it and have it out of the manner.

Remove the auger components – spacers and blades – i past one. Once all the blades are out, remove the encompass plate.

Installing the New Auger

Now is the time to install the new auger. Accept the new one and slide the encompass plate in first. And then, slide the first blade spacers in before the first blade. Continue doing this until all the spacers and blades are in.

Put the servant of the begetting back in place and tighten it. Use the adjustable wrench to ensure it is tight. At present, marshal the blades of the auger into the housing of the auger associates. Also, put the washer and e-clip back into their place.

When putting the auger assembly back into the auto, be certain that the cover plate is prepare properly in place and aligned. Push the assembly in and make sure it snaps into position.

Supervene upon the actuator rod, its screw, the shield and the screw, besides as the two screws that concord the comprehend in place.

Yous can at present put the ice saucepan back in identify and test the auger assembly.

Prices pulled from the Amazon Product Advert API on:

Product prices and availability are accurate as of the engagement/time indicated and are subject to change. Any cost and availability data displayed on [relevant Amazon Site(south), as applicative] at the time of purchase volition employ to the purchase of this product.

This video is a footstep-by-footstep demonstration of how to replace the auger…

Important Annotation

It is important to know when to switch the refrigerator off during repairs. So don't work with the fridge on. Unplug it from power or trip the circuit billow.

In this guide on how to replace the auger in a GE ice maker, you will see parts with sharp edges. Therefore, utilise a practiced pair of work gloves if y'all have i. Otherwise, tread carefully effectually those edges to avoid injury.

Cheque out these other manufactures…

GE Refrigerator Control Panel Non Working [How to Fix]

GE Refrigerator Autofill Overfilling [How to Fix]

How to Supercede Auger in GE Ice Maker [Quick Guide]

GE Refrigerator Making Noise [How to Fix]

How To Remove Doors From a GE Fridge [Quick Guide]

GE Refrigerator Beeping [How to Set]

GE Ice Maker Freezing Up [How to Fix]

Get Instant Assistance — Enquire An Experienced Verified Apparatus Technician

Need expert assistance? Click here to utilize the conversation box on this folio to speak with a verified appliance technician right away. No need for expensive in-domicile service calls. No appointments. No waiting.

Source: https://refrigeratorsreviewed.com/how-to-replace-auger-in-ge-ice-maker-quick-guide/

Posted by: kellyjonan2002.blogspot.com

Share this post